TOBO STEEL GROUP CHINA
TOBO STEEL GROUP CHINA
Add to Cart
DN100 PN16 Flange Or Threaded End A351 CF8M Stainless Steel Globe Valve
Globe valves
A Globe valves is a linear motion valve and are primarily designed to stop, start and regulate flow.
The disk of a Globe valve can be totally removed from the flowpath or it can completely close the flowpath.
Conventional Globe valves may be used for isolation and throttling services. Although these valves exhibit slightly
higher pressure drops than straight=through valves (e.g., gate, plug, ball, etc.), they may be used where the pressure
drop through the valve is not a controlling factor.
Because the entire system pressure exerted on the disc is transferred to the valve stem, the practical size limit for these
valves is NPS 12 (DN 300). Globe valves larger than NPS 12 (DN 300) are an exception rather than the rule. Larger
valves would require that enormous forces be exerted on the stem to open or close the valve under pressure. Globe
valves in sizes up to NPS 48 (DN 1200) have been manufactured and used.
Globe valves are extensively employed to control flow. The range of flow control, pressure drop, and duty must be
considered in the design of the valve to avert premature failure and to assure satisfactory service. Valves subjected
to high-differential pressure-throttling service require specially designed valve trim.
Generally the maximum differential pressure across the valve disc should not exceed 20 percent of the maximum
upstream pressure or 200 psi (1380 kPa), whichever is less. Valves with special trim may be designed for applications
exceeding these differential pressure limits.
Quick Details
| SPECIFICATIONS FOR STEEL GLOBE VALVES | |
| Pressure rating and size: | PN10,PN25,PN40,PN64,150L-600LB |
| DN40 to DN600 | |
| 1-1/2"~24" | |
| Material: | Body : A216-WCB,A325-LCB,A217-WC6,CF8,CF8M |
| Disc : A105+13Cr, SS304, SS316 | |
| Stem : A182+F6a,A182-F6a | |
| Bonnet :A216-WCB,A325-LCB,A217-WC6,CF8,CF8M | |
| Operated type | Handwheel |
| Structure: | stopcock for water |
| Flange connection: | ASME B16.5,EN1092 |
| Butt-weld ends: | ASME B16.25 |
| Medium: | W.O.G |
| Temperature: | -20 to 425°C |
| SIZE | d | L | H | W | D | C | G | T | N-ΦM |
| 1" | 25 | 127 | 212 | 140 | 108 | 79.5 | 51 | 11.1 | 4-16 |
| 1 1/4" | 32 | 140 | 243 | 160 | 117 | 89.5 | 64 | 12.7 | 4-16 |
| 1 1/2" | 40 | 165 | 246 | 160 | 127 | 98.5 | 73 | 14.3 | 4-16 |
| 2" | 50 | 203 | 252 | 200 | 152 | 120.5 | 92 | 15.9 | 4-19 |
| 2 1/2" | 65 | 216 | 308 | 200 | 178 | 139.5 | 105 | 17.5 | 4-19 |
| 3" | 80 | 241 | 327 | 250 | 190 | 152.5 | 127 | 19.1 | 4-19 |
| 4" | 100 | 292 | 384 | 250 | 229 | 190.5 | 157 | 23.9 | 8-19 |
| 5" | 125 | 356 | 484 | 300 | 254 | 216 | 186 | 23.9 | 8-22 |
| 6" | 150 | 406 | 547 | 350 | 279 | 241.5 | 216 | 25.4 | 8-22 |
| 8" | 200 | 495 | 669 | 350 | 343 | 298.5 | 270 | 28.6 | 8-22 |
| 10" | 250 | 622 | 824 | 200 | 406 | 362.5 | 324 | 30.2 | 12-25 |
ADVANTAGES:
Typical Applications of Globe valves
The following are some of the typical applications of Globe valves:
Packing Details:
We choose suitable wood cases according to different valves and arrange skilled workers to pack in case of bruise.
Long term cooperated forwarder will book space, clear customs and transport for us without delay. There are three
ways for transportation, by sea, by air and by train. We will arrange transportation according to customers' needs.
