TOBO STEEL GROUP CHINA
TOBO STEEL GROUP CHINA
Add to Cart
Floating Ball Valve Stainless Steel 3 Inch Ball Metal Float Controlled Valve
| Product Name: | Floating Ball Valve | Application: | Cold Water TankPetroleum , Chemistry |
|---|---|---|---|
| Size: | 22mm | Pressure: | 1000 WOG |
| Standard: | DIN / BS / ANS I/ JIS / API / ASME | Body: | STAINLESS STEEL ASTM A 182 F316 |
| Stem: | STAINLESS STEEL ASTM A 182 F316 | ||
| High Light: | 22mm Petroleum Floating Ball Valve,SIP Sterilization Floating Ball Valve,WCB Petroleum Floating Ball Valve | ||
Customized Size Floating Ball Valve For Petroleum , Chemistry API 6D
Floating Ball Valve introduction:
Valve design, meet the requirement of CIP and SIP sterilization and cleaning, has davanjuge of 180 °C , pressure 8 bar, automatic compensating sealing design, small torque, long sevice life etc. Available with a variety of structures, such as electric horizontal pneumatic,stainless steel,horizontal vertical pneumatic key manually handle, can also be equipped with control unit, locator, position sensor and other compatible automatic control system.
BALL VALVE, THREADED,
STAINLESS STEEL ASTM A 182 F316 BODY/BALL STEM,
SEAT/SEAL,
NOMINAL DIAMETER 1/2 in, CLASS 1000 WOG,
FULL BORE TYPE, DRIVE LEVER 1/2 BORE.
MSS SP-110 STANDARD.
Floating Ball Valve Main part & material
| Part name | Material |
| body | WCB,ZG1Cr18Ni9Ti,CF8 |
| ball | 1Cr18Ni9Ti 304,316 |
| stem | 1Cr18Ni9Ti 304,316 |
| seal ring | Polytetrafluoroethlene(PTFE) |
| packing | Polytetrafluoroethlene(PTFE) |
| DN | G | B | L | E | H | A |
| 6 | 1/4" | 8 | 54 | 11.5 | 52 | 105 |
| 10 | 3/8" | 10 | 54 | 11.5 | 52 | 105 |
| 15 | 1/2" | 15 | 62.5 | 14 | 65 | 130 |
| 20 | 3/4" | 20 | 73.5 | 15 | 70 | 130 |
| 25 | 1" | 25 | 86 | 15 | 78 | 150 |
| 32 | 1-1/4" | 32 | 101 | 18 | 82 | 180 |
| 40 | 1-1/2" | 38 | 110 | 19 | 90 | 200 |
| 50 | 2" | 50 | 123 | 19 | 98 | 200 |
| 65 | 2-1/2" | 64 | 165 | 23 | 140 | 240 |
| 80 | 3" | 80 | 190 | 25 | 135 | 260 |
Technical Specification
| Nominal pressure(Mpa) | PN | 2.5,4.0,6.4 |
| Strength testing pressure(Mpa) | PT | 3.8,6.0,9.6 |
| Low pressure seal test(Mpa) | 0.6 | |
| High pressure seal test(Mpa) | 3.0,4.8,7.6 | |
| Applicable medium | water, oil, gas, nitric acid, acetic acid | |
| Applicable temperature | -40～180℃ | |
Feature:
- Anti-blowout Structure of Valve Stem
When medium pass through the valve, the pressure in valve body may possibly
push the stem out, or when the valve is in repair, if there is pressure in the middle
cavity, the stem or medium seems to easily fly out upon disassembling the valve,
which can cause injures to human beings,
To prevent the possibilities, a dummy club is packing and thrust bearing are burnt
or packing is damaged due to other causes, the pressure of medium in valve body
will make the dummy club of valve stem in close contact with the upper seal face of
valve body.
Thus to prevent medium leaking out from the damage packing position.
- Reliable Seal Structure
The seat is made of PTFE. Because the contact area between seat and the ball will
becomes more high with rising of pressure of the middle cavity,
Small Resistance ball valve has the smallest resistance of all the valve, in the case
of reduced bore, the resistance is little still.
- Prompt switch
The ball valve circumrotates in 90°,It work quickly to open or close.
Specifications:
Technical Specification
- Nominal diameter: 1/2”-25”
- Applicable Temperature: -29℃～425℃(steel) -40℃～550℃(stainless steel)
- Nominal pressure: 150lbs, 300lbs, 600Lb,900lbs,1500lbs PN16/25/40/64/100/160, JIS 5K /10K/20K
- Applicable Medium: water ,gas,oil,and other causticity medium.
Floating Ball Valve Features:
- Anti-blowout Structure of Valve Stem
When medium pass through the valve, the pressure in valve body may possibly push the stem out, or
when the valve is in repair, if there is pressure in the middle cavity, the stem or medium seems to easily
fly out upon disassembling the valve, which can cause injures to human beings, To prevent the
possibilities, a dummy club is packing and thrust bearing are burnt or packing is damaged due to other
causes, the pressure of medium in valve body will make the dummy club of valve stem in close contact
with the upper seal face of valve body. Thus to prevent medium leaking out from the damage packing
position.
- Reliable Seal Structure
The seat is made of PTFE. Because the contact area between seat and the ball will becomes more high
with rising of pressure of the middle cavity, Small Resistance ball valve has the smallest resistance of all
the valve, in the case of reduced bore, the resistance is little still.
-Prompt switch
The ball valve circumrotates in 90°,It work quickly to open or close.
| Test Pressure
Main Connection Dimensions
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||